Setup instructions:

  1. Charge your CryoShape using the charger supplied before use. Disconnect before use.
  2. Loop one end of the Velcro belt around the handle of one end of the CryoShape FatFreezer machine.
  3. Apply a protective pad to the desired area of your body (one treatment per pad.  They can not be reused. Only used FatFreezer certified pads).
  4. Carefully place your CryoShape machine (metal plate) over the protective membrane (make sure the metal plate does not have direct contact with your skin).
  5. Wrap the velcro belt firmly around the body part and apply the other end around the opposite loop and attach the CryoShape firmly.
  6. Press either the ‘15’ or ‘30’ time allotment button to turn on your CryoShape (Note: 15 minutes for toning area/ 30 minutes to treat fat cells in that area).  
  7. You will hear the machine start, see the front ventilation doors open and start to feel the penetrating treatment.
  8. You can press the OFF button at any time. Your CryoShape will automatically beep and switch off at the end of the treatment time (15 / 30 minutes). 
  9. Remove your CryoShape and place it on a flat surface.  The cooling doors will remain open for a short time as your machine self regulates. Let your CryoShape machine sit for 10 minutes to return to normal temperature before cleaning and storing away. 
  10. Gently massage the treated area of the body, using circular motions for at least 2 minutes.  (For most effective use see our Fat Freezer massage machine).